IP Mesh Solutions
DTC’s Mesh technology provides proven high-capacity multi-domain IP connectivity in challenging environments that sits seamlessly alongside existing public or private infrastructure. The ability to project a significant bi-directional capability into areas unreachable by existing technologies is tremendously powerful and can play a pivotal role in surveillance operations. DTC Mesh is a proven and flexible MANET (Mobile AdHoc Networking) solution which has successfully been deployed in the most adverse environments
Offered in two variants, Phase 4 which is the fourth iteration of DTC Mesh designed for use on a range of dedicated radio platforms and is available with 2 Watt and 5 Watt power options. Phase 5 is DTC’s next-generation Mesh software designed for installation on both dedicated radio platforms and the multi-capability Software Defined Radio (SDR) as a software application. All Phase 5 platforms offer the benefits of standard Mesh but are also Multiple Input/Multiple Output (MIMO) capable of double data throughput.
Download the Phase 4 and MeshUltra Tactical Waveform COFDM IP Mesh brochures here:
Phase 4 Standard Mesh Brochure
MeshUltra Tactical Waveform COFDM IP Mesh Brochure
DTC Difference
Third-party testing has time and again proven the superior performance of DTC’s Mesh system in Non-Line of Sight (NLOS) urban environments over other leading competitors. Recent leading-edge advances have provided significant capability enhancements through the introduction of MeshUltra technology and higher frequency bandwidth options. With channel bandwidths up to 20MHz and adaptive modulation up to 64QAM, DTC MeshUltra supports data rates of up to 87Mbps
Uses
- Infrastructure protection
- Identifying and monitoring of terrorist threats
- Monitoring of serious crime
- Public order policing
- Intelligence gathering
- Maritime
- Downlinks
- Battlefield Situational Awareness
- Robotic and Autonomous Systems (RAS) including UAVs, UGVs and USVs
- Connected and Autonomous Vehicles (CAV)
NETNode IP Mesh Phase 5 - Robust Mobile 2x5W+
The NETNode 5RM 5W variant provides up to 10W total RF power output over two transmit ports. The 5RM is ideal for extended outdoor deployment and feature-rich with built-in GPS receiver and both composite and SDI video inputs.
Features and Applications
- 2 x 5W RF transmitters (up to 10W total)
- Self-forming, self-healing mesh architecture
- Ideal for use for wide area coverage & multi-hop, mobile applications such as robotics
- HD video encoder - data capacity of greater than 32Mbps of IP data possible
- Built in composite video encoder
- Built in GPS receiver
- Software configurable RF bandwidth between 1.25MHz and 20MHz
- Interlink mode for enhanced capability and large scale systems
- 64Gb of on-board storage with store & forward functionality
- Built in encryption
NETNode IP Mesh Phase 5 - Robust Tri-Band+
Phase 5 is the latest generation of DTC's NETNode IP Mesh Radio family, offering built-in dual HD video encoders and MIMO capability, providing our highest ever data capacities and maximum frequency flexibility. The latest tri-band product offers increased frequency agility with support for L-band and C-band, provided by one physical unit. NETNode IP Mesh Radios can be combined in a fluid self-forming, self-healing mesh network containing up to 20 nodes. The tri-band radios exchange bidirectional IP data in a single RF channel or can utilise different frequency channels for the uplink and downlink traffic, thereby, simplifying frequency management in a complex network. The entire mesh can operate in bandwidth from 1.25kHz to 20MHz, employing DTC's unique COFDM modulation scheme. Multiple Input Multiple Output (MIMO) technology transmits two signals in the same channel, almost doubling the available data capacity can also be configured in standard Mesh.
Features and Applications
- Tri Band capability offered in L-band (1.7-1.85GHz), S-band (2.2-2.5GHz) and C-band (4.4-4.9GHz)
- Self-forming, self-healing Mesh architecture
- Ideal for use for wide area coverage & multi-hop, mobile applications such as robotics and city wide infrastructure
- 4G IP connectivity for additional backhaul offering beyond mesh
- Low latency IP communication
- GPS receiver (antenna required)
- 64Gb of on-board storage with store & forward functionality
- Built in encryption (DES as standard, AES128/256 available subject to export control)
NETNode IP Mesh Phase 5 - Plain Tri-Band+
Phase 5 is the latest generation of DTC's NETNode IP Mesh Radio family, offering built-in dual HD video encoders and MIMO capability, providing our highest ever data capacities and maximum frequency flexibility. The latest Tri-Band product offers increased frequency agility with support for high L-band, S-band and C-band, provided by one physical unit. NETNode IP Mesh Radios can be combined in a fluid self-forming, self-healing mesh network containing up to 16 nodes. The Tri-Band radios exchange bidirectional IP data in a single RF channel, or can utilise different frequency channels for the uplink and downlink traffic, thereby, simplifying frequency management in a complex network. The entire mesh can operate in a bandwidth from 625kHz to 10MHz, employing DTC's unique COFDM modulation scheme. Multiple Input Multiple Output (MIMO) technology transmits two signals in the same channel, almost doubling the available data capacity, can also be configured in Standard Mesh.
Features and Applications
- Tri Band capability offered in L-band, S-band and C-band
- Ideal for use for wide area coverage & multi-hop, mobile applications such as robotics and city wide infrastructure
- Self-forming, self-healing mesh architecture
- 4G IP connectivity for additional backhaul offering beyond mesh
- Low latency IP communication
- Fan cooled with three 25mm fans
- Software configurable RF bandwidth from 625kHz to 10MHz
- Inbuilt Field Controller interface
- Interlink mode for enhanced capability and large scale systems
- 64Gb of on-board storage
- Built in encryption
NETNode IP Mesh Phase 5 - Robust Mobile 2x2W+
Phase 5 is the latest generation of DTC's NETNode IP Mesh radio family offering built-in dual HD video encoders and MIMO capability for our highest ever data capacities. The NETNode 5RM is a Robust Mobile variant and an addition to the Mesh 5 product family offering alternative form factor to its sister, the NetNode Phase 5 Robust, being small allows a wider variety of applications. The RM is ideal for extended outdoor deployment and feature-rich with new additions including built-in GPS receiver and both composite and SDI video inputs comparable to the previous Phase 3 and 4 Robust products. Interoperable with DTC’s Phase 3, 4 and 5 Mesh allowing simple upgrade in the field, while adding flexibility and ease of use as nodes can be integrated into existing infrastructure, reducing cost and making it easy to expand any network.
Features and Applications
- Self-forming, self-healing mesh architecture
- HD video encoder - data capacity of greater than 25Mbps of IP data possible
- Ideal for use for wide area coverage & multi-hop, mobile applications such as robotics
- Low latency IP communication
- Built in composite video encoder
- Built in GPS receiver
- Software configurable RF bandwidth between 1.25MHz and 10MHz
- Interlink mode for enhanced capability and large scale systems
- 64Gb of on-board storage
- Built in encryption
NETNode IP Mesh Phase 5 - Plain+
The Multiple Input/Multiple Output (MIMO) node is the latest breakthrough in mesh technology from DTC, offering multiple transmit and receive antennas, transmitting extra data on the same frequency by overlaying two signals in the space of one. This technique almost doubles the IP throughput and provides twice as much output power increasing range. The Phase 5 unit builds on DTC’s latest technology development and algorithmic improvements contained within the unit resulting in a further reduced noise floor and improved spectral efficiency. The unit can also be configured to have the 2 x 2dBi or 2 x 4dBi antenna directly mounted, making it ideal for instant deployment where high data rates are required. Backwards compatible with all DTC mesh products and can communicate with all existing hardware.
Features and Applications
- Dual Diversity in MIMO Mode
- Anti-fade features in multipath environments
- Improved sensitivity (up to 50% increase in range)
- Greater resistance to interference
- Combined signal multiplexing and diversity in MIMO mode
- Proven Non-Line of Sight (NLOS)
- Backwards compatibility
- DUAL HD encoder in built
- Fixed and rotary downlinks
- High point relay
- Ship installation
NETNode IP Mesh Phase 5 - Robust+
The Multiple Input/Multiple Output (MIMO) node is the latest breakthrough in mesh technology from DTC, offering multiple transmit and receive antennas, transmitting extra data on the same frequency by overlaying two signals in the space of one. This technique almost doubles the IP throughput and provides twice as much output power increasing range. The Phase 5 unit builds on DTC’s latest technology development and algorithmic improvements contained within the unit resulting in a further reduced noise floor and improved spectral efficiency. The Phase 5 unit also includes Power Over Ethernet (POE) and IP control on all units, enabling the unit to be powered and configured from just one cable. The unit can also be configured to have the 2 x 2dBi or 2 x 4dBi antenna directly mounted, making it ideal for instant deployment where high data rates are required. Backwards compatible with all DTC mesh products and can communicate with all existing hardware.
Features and Applications
- Dual Diversity in MIMO Mode
- Anti-fade features in multipath environments
- Improved sensitivity (up to 50% increase in range)
- Greater resistance to interference
- Combined signal multiplexing and diversity in MIMO mode
- Proven Non-Line of Sight (NLOS)
- Backwards compatibility
- Dual HD encoder in built
- Power Over Ethernet (POE)
- Fixed and rotary downlinks
- High point relay
- Ship installation
SOL8SDR-H Special Role Radio+
Based-on DTC’s game-changing SOLO8 Software Defined Radio (SDR) platform, the SDR-H is equally at home operating as a tactical ad hoc network (MANET) IP Mesh node, a P2P COFDM transmitter or a P2P receiver streaming video to a tablet PC. The SDR-H also offers dual on-board HD-capable video encoders and support for a variety of different camera interfaces including HDMI (with optional cable), an “open mic” full duplex audio channel, in-built GPS receiver and on board SD card storage as well as 2W of total output power. The Special Role Radio joins DTC’s versatile family of IP Mesh and P2P COFDM radios designed to meet the requirements of a diverse range of surveillance and battlefield applications. It combines a familiar “soldier radio” physical form factor, “bullet proof” construction and simplified user interface with the ability to use standard MBITR-style battery packs, chargers and holsters.
Features and Applications
- Dual high profile HD H.264 independent video encoders
- 2W total output power
- Low latency Mesh radios - under 180ms for video; less than 20ms data only
- Native SD/HD-SDI or composite/HDMI via adaptor; HDMI via side connector
- Microphone inputs and headphone output for recording, transmission or talkback
- Growing USB support for peripherals such as 3G/4G/Wi-Fi dongles
- Ethernet, RS232 and RS485 connectivity and 128GB built in storage
- Low power consumption, typically 7.5W to 10W based on encoder output
- Battery life - 5hrs @ 12Mbps; 12hrs data/audio only
- Range NLOS - 1.5km single hop; 15km air to ground
SOLO8 2x2W Software Defined Radio (Plain)+
The SOLO8 Software Defined Radio is an ultra-miniature COFDM digital video transceiver from Domo Tactical Communications (DTC), designed specifically for Point of View (PoV), body worn and concealment applications. Dependent on the applications loaded the platform can operate as a Transmitter, Dual Encoder, Standard IP Mesh and MIMO IP Mesh. Three enclosure variants are available: Concealment (-C), Robust (-R), Plain (-P). Plain (-P) provides a compact higher power solution (2x2W) for increased range and enhanced connectivity with native RJ45 and USB as standard.
Features and Applications
- 2x2W COFDM transceivers for use as COFDM Transmitter or IP Mesh
- ISM band telemetry transceiver for control, PTZ and low power standby
- Dual SD/HD-SDI video inputs for recording, transmission and analysis
- Microphone inputs and headphone output for recording, transmission or talkback
- Growing USB support for peripherals such as 3G/4G/Wi-Fi dongles
- Ethernet, RS232 and RS485 connectivity and 128GB built in storage
- Higher power packaging without the need for breakout cables
- Very low power consumption: typically 12.5W
- Exceptionally small size: 200mm x 100mm x 27mm
- Weighs only 950g
SOLO8 Software Defined Radio (Concealment)+
The SOLO8 Software Defined Radio is an ultra-miniature COFDM digital video transceiver from Domo Tactical Communications (DTC), designed specifically for Point of View (PoV), body worn and concealment applications. Dependent on the applications loaded the platform can operate as a Transmitter, Dual Encoder, Standard IP Mesh and MIMO IP Mesh. Three enclosure variants are available: Concealment (-C), Robust (-R), Plain (-P). Concealment (-C) is an ultra-miniature package ideal for integration into the smallest concealment solutions. The UHF version is larger than the standard SOL8SDR-C due to the lower frequency of operation (320-470MHz). Please see the SOL8SDR UHF Operation Guidelines publication for important application notes. One/two 2W PA accessories can be connected via D1806 for extended range.
Features and Applications
- 2x100mW COFDM transceivers for use as COFDM Transmitter or IP Mesh
- ISM band telemetry transceiver for control, PTZ and low power standby
- Dual SD/HD-SDI video inputs for recording, transmission and analysis
- Microphone inputs and headphone output for recording, transmission or talkback
- Growing USB support for peripherals such as 3G/4G/Wi-Fi dongles
- Ethernet, RS232 and RS485 connectivity and 128GB built in storage
- Compact packaging with ultra-miniature connectors
- Very low power consumption: typically 7.5W
- Exceptionally small size: 50mm x 50mm x 18mm (24mm UHF)
- Weighs only 70-82g
SOLO8 Software Defined Radio (Robust)+
The SOLO8 Software Defined Radio is an ultra-miniature COFDM digital video transceiver, designed specifically for Point of View (PoV), body-worn and concealment applications. Dependent on the applications loaded the platform can operate as a Transmitter, Receiver, Dual Encoder, Standard IP Mesh and MIMO IP Mesh. Further information on software capability can found in the SDRAPP datasheets. Robust (-R) provides a passively cooled IP66 rated enclosure ideal for outdoor, or body-worn applications. The UHF version is larger than the standard SOL8SDR-R due to the lower frequency of operation (320-470MHz). Please see the SOL8SDR UHF Operation Guidelines publication for important application notes.
Features and Applications
- Compatibility: Backwards compatibility for all DTC Mesh products and can communicate with existing hardware enhancing the equipment.
- Proven, Non-Line-of-Sight capability: DTC products penetrate into NLOS environments making it ideal for inner city environments when the ability to communicate quickly and easily is mission critical.
- Multiple applications: With the latest Phase 5 technology and new smaller, robust enclosures, DTC has a cohesive range of products and applications, from front end concealment to infrastructure nodes.
- Dual HD encoder: Phase 5 Mesh platforms have dual HD encoding built-in.
- Flexibility: Multiple applications, standard and MIMO Mesh, recording, streaming and 4G.
SOLO8 NanoVue HD Robust Receiver+
The SOLO8 NanoVue HD Robust Receiver is a fully portable digital diversity receiver, which incorporates a high-resolution scratch-resistant daylight viewable video screen, an antenna diversity pair and a battery. The SOL8NNVHDR incorporates DTC’s SOL8SDR “Software Defined Radio” technology. As such it can be configured as a Mesh Transceiver, able to operate with other SDR and NETNode Mesh radios to allow effective IP video delivery to multiple destinations. Alternatively, the SOL8NNVHDR can be configured as a traditional unidirectional COFDM receiver.
Features and Applications
- Configurable receive method
- DTC COFDM capable
- DTC Mesh capable
- Bi-directional telemetry option
- Recording storage option
- IP68 rated
SDR Application Receiver+
SDR applications can be used in combination with SOL8SDR products to add functionality. SOLO receivers can operate in a variety of bandwidths allowing the user to trade off image quality against range to suit all types of missions. Excellent range, performance and spectral efficiency are offered when operating in the 2.5MHz/1.25MHz/625kHz narrow bandwidth modes. For excellent image quality at shorter ranges the 8MHz DVB-T modulation can be employed.
Related Products
SDR Application IP Encoder+
SDR applications can be used in combination with SOL8SDR products to add functionality. Dual Ultra-low latency H.264 SD and HD encoding provides the user two video sources providing multiple view points from a single unit. Motion based video analytics allow for efficient use of recording. Optional encryption ensures recordings, streams and transmission remain secure.
NETNode IP Mesh Phase 4 - Robust 10W+
NETNode IP Radios can be combined in a fluid self-forming, self-healing mesh containing up to sixteen radios. The NETNode radios within the Mesh exchange data on a single frequency, simplifying frequency management. The entire mesh can occupy just 2.5MHz of bandwidth (1.25, 1.5, 1.75, 2.5, 3.0, 3.5, 5.0, 6.0, 8.0 and 10MHz also available). The NETNode radios employ the unique DTC COFDM modulation scheme and therefore offer excellent RF penetration and performance in the presence of multipath. The NETNode IP Mesh radios can provide up to 14.6Mb/s of IP data (data rate depends on mode, number of nodes and range between nodes). This available bit-rate can be used to exchange IP data traffic between nodes.
Features and Applications
- 10W transmit power
- COFDM waveform for excellent NLOS & multipath performance
- Flexible RF channel bandwidths (1.25 to 10 MHz)
- Range of frequency variants across public and private bands
- Up to 14.6Mbps UDP data capacity in a Mesh
- Up to 16 nodes in Mesh
- Built in encryption (DES as standard, AES128/256 optional subject to Export Control)
Related Products
NETNode IP Mesh Phase 4 - Robust 5W+
The NETNode Robust 5W mesh radio can provide up to 14.6Mbps of IP data (data rate depends on mode, number of nodes and range between nodes). The highly flexible mesh topology means that data can be exchanged between nodes in a point-to-point or multi-point fashion. The 5 Watt power output offers very long range capabilities. The self-forming, self-healing mesh architecture makes the NETNode product ideal for use in marine and mobile surveillance applications, command and control applications, or advanced robotics. The NETNode Robust 5 watt radio also has an inbuilt 5 watt power amplifier offering linearized 37dB output.
Features and Applications
- 5 Watt transmit power
- 14.6Mbps maximum bandwidth
- 25 watt power consumption
- SMA Antenna
- TNC Antenna
- WT. Amphenol, Fischer, Binder
- Optional, Mission Commander Strategic
- Fixed and rotary downlinks
- Unmanned Aerial Vehicle (UAV)
- Highpoint relay
- Rib/Boat installations
- Towing vessel
- Vehicle installations
Related Products
NETNode IP Mesh Phase 4 - Robust 2W+
NETNode IP radios can be combined in a fluid self-forming, self-healing mesh containing up to sixteen radios. The NETNode radios within the mesh exchange data on a single frequency, simplifying frequency management. The entire mesh occupies just 1.25MHz of bandwidth (1.5, 1.75, 2.5, 3, 3.5, 5, 6, 7, 8 and 10MHz also available). The NETNode radios employ the unique DTC COFDM modulation scheme and therefore offer excellent RF penetration and performance in the presence of multipath. The NETNode mesh radios can provide up to 14.6Mb/s of IP data (data rate depends on mode, number of nodes and range between nodes). This available bit-rate can be used to exchange IP data traffic between nodes. The NETNode can be connected to third party composite cameras using the AVI option and PTZ control can be achieved using the serial interface.
Features and Applications
- 2W transmit power
- COFDM waveform for excellent NLOS & multipath performance
- Flexible RF channel bandwidths (1.25, 1.5, 1.75, 2.5, 3, 3.5, 5, 6, 7, 8 and 10MHz)
- Range of frequency variants across public and private bands
- Up to 14.6Mbps UDP data capacity in a Mesh
- Up to 16 nodes in Mesh
- Optional AES 128/256 encryption**
Related Products
SOLO8 HDMI/Composite to SDI Converter+
The SOLO8 Software Defined Radio is an ultra-miniature COFDM digital video transceiver from Domo Tactical Communications (DTC), designed specifically for Point-of-View (PoV), body-worn and concealment applications. The SOLO8 HDMI/Composite to SDI Converter is an accessory designed to expand the range of possible video sources for the SOLO8 Software Defined Radio product range. Designed with size and simplicity in mind the converter accessory is powered by SOLO8 based products over the same cable used for SDI video. Source and format switching is handled automatically so is seamless to the end user.
The terms HDMI and HDMI High-Definition Multimedia Interface, and HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
Features and Applications
- Accepts analogue PAL/NTSC composite video signals and converts to 625/525 SDI video standard
- Accepts a range of SD/HD HDMI video standards and converts to SDI or HD-SDI as required
Related Products